Cold chain storage industrial automated pallet shuttle systems

Product Introduction

Advantage of four way shuttle

● Used low temperature battery to make sure four way shuttle can work in the cold storage ● Circuit board are covered with membrane that makes the wire cable work normally as standard temperature. ● Low temperature hydraulic oil are used for hydraulic system ● Ability to handle the pallets FIFO and LIFO. And the possibility to change at every time. Both can be available in the same block.

Four way shuttle features used in the cold storage

● Operating temperature: from -30°C to +35°C ● Relative humidity: max 80% ● Shuttle better always remains in the cold-store environment ● Before switching on the power again the shuttle must be dry (no condensation)

How to use the four way shuttle in the cold storage

● Warehouse conditions: Bulk Cold Stores,Multi-purpose Cold Stores,Small Cold Stores,Frozen Food Stores,Mini Units/Walk-in Cold Stores,Controlled Atmosphere (CA) Cold Stores. ● Keep the shuttle always INSIDE the Cold Store. But charge the batteries always OUTSIDE the Cold Store charge only after warming up to normal temperature. ● So in 3 shift applications best to use 3 battery packs : 1 set working in the shuttle 1 set warming up 1 set charging in the battery station. Battery and shuttle must be completely dry before connecting ● For existing Cold Store Rooms check for condensation or icing on rails, floors ● For NEW Cold Store Warehouses check if a intermediate area is foreseen between ambient and frozen zone, humidity around a frozen storage zone is prohibited.